- Soaks deep into fibres
- Repairs minor scuffs
- Extremely flexible
- Helps restore heavy cracking
Leather Binder is a thin liquid filler that can be used to strengthen the weakened fibre structure of leather that is heavily worn or cracked.
It can also be used on small imperfections in the leather such as scuffs and scratches, allowing the leather to be sanded smooth.
The Binder soaks deep into the leather fibres holding them tightly together creating a stronger leather structure. This stronger structure greatly improves the tensile strength of the leather, which makes repairing leather easier and gives longer lasting results.
Why is this important?
It gives you the confidence that when you make a repair you know it will last. For instance, if you just used the flexfil you would get a great repair but it might not last. Not because the flexifil isn’t good enough, but because the leather beneath it is weak – it is the leather that might tear open, not the filler. By using the Leather Binder first, you guarantee yourself a much longer lasting repair.
The Leather Binder also makes sanding worn leather possible. By strengthening the fibres you can sand leather down that would otherwise have gotten worse as you sanded it.
Leather Binder is Suitable For
Leather Binder is ideal for repairing damage to all different articles of leather, from furniture and car interiors to clothes, shoes, handbags and even equestrian leathers.
Aniline and Semi-Aniline Leather
Two Tone, Mottled and Antique Finished Leather
Oil and Wax Pull Up Leather
Vinyl and Faux Leather, including Bonded Leather
Leather Binder Coverage and Shelf Life
Store in a cool dry place, away from direct sunlight.
Store between 8°C and 30°.
Once opened, use within 1 year.
Please note that when ordering 1 litre, you will receive 2x 500ml bottles.
For Light to Heavy Cracking:
The Leather Binder should be applied to the affected areas with a sponge. It should be applied with pressure to allow the product to soak into the fibre structure. Leave the Binder to dry; this can be sped up with the use of a hairdryer.
Apply a further three coats in the same way. It is important to use pressure when applying the Leather Binder for the first four coats, this will ensure that the product soaks deep into the network of fibres and hold them tight together which will create a much stronger base for a long-lasting repair.
You will notice as the Leather Binder soaks in, it will cause the absorbent areas to darken. At this stage, the surface can be sanded with wet and dry sandpaper, or for best results, an Abralon sanding pad to smooth out any raised or rough areas. You should always remove any dust caused from the sanding action with a damp cloth.
Several more coats of Leather Binder should then be applied; this time by gently wiping it over the cracks rather than applying pressure. Again, drying between coats. Applying the product in this gentle manor will allow it to build up in the damaged areas and start to fill out the cracks. Numerous coats can be applied in this way to achieve the desired fill level.
Depending on the severity and depth of the cracks, they can be filled out with the Leather Binder alone. However deep cracks may be better repaired using Flexifil.
The Leather Binder should be applied to the damaged area with a sponge or cotton bud. It should be applied with pressure to allow the product to soak into the fibre structure. Leave the Binder to dry; this can be sped up with the use of a hairdryer. A further two coats applied in the same way is normally required so that the damage can be sanded smooth. Further applications may be required if the area still looks and feels fibrous in areas. Colour restoration will then need to take place in the damaged area.
Why is the Leather Binder an important step in repairing damaged leather?
The fibre structure within the leather is what gives leather its strength. When leather becomes damaged, this fibre structure becomes weaker which may then lead to rips and tears. By applying the Binder first, it binds the loose fibres back together, making a much stronger base for the filler to sit on. If this step is missed out, the fibres beneath the filler will still be weak and may tear under the repaired area.
Do I have to use the Binder before repairing leather with one of the fillers?
No, it does not have to be used, however it is highly recommended as it greatly improves the strength of the leather, before applying the filler. This means that your repair will last a lot longer by using the Binder first.
I have a hole in my leather, do I still need to use the Binder?
If the hole is due to wear and tear then yes, we would recommend using the Leather Binder, however if the hole has been caused by a burn or something sharp, the fibre structure is more than likely still intact and therefore the Binder is not so important.